|Material:||H Beam. Round Pipe Round Bar Angle Steel Etc.||Grade:||Q355B&Q235B|
|Blasting:||Sa 2.5||Paint:||Epoxy Rich Zinc, Epoxy Mio Barrior Middle Paint, DFT 125UM|
|Span:||As Per Reuirement||Roof:||Aluminum-plastic Panel L75, 0.6MM|
|Wall:||Glass Curtain||Earthquake Resistant:||8.0 Grade|
H Beam Car Showroom Building,
Glass Curtain Car Dealer Showroom
Pre-Engineering Industrial Design Portal Frame Heavy Duty Steel Structure Factory Building
The steel factory building is a building structure made of steel, including internal support and external enclosure structure. The steel frame is made of a portal steel frame, including steel columns, steel beams, and bracing. The portal steel frame and the external enclosure structure constitute an enclosed building structure with sufficient strength to withstand severe weather such as strong wind, rain, and snow.
Metal structures processed the cut, welded, drilled, and painted in the workshop, and then transported to the construction site, often referred to as prefabricated structures. The prefabricated steel structure does not need to be welded on-site, and each component only need to be fixed with bolts, which is convenient and quick to install and save labor. Five main types of structural components make up the steel frame-tension members, compression members, bending members, combined stress members, and their connections.
1) Column and Roof Beam: Q355B welded H section Beam
2) Crane Beam: Q355B welded H section Beam with a vertical stiffening rib
3) Roof Horizontal Bracing: Q235B Steel Rod
4) Column X Cross Bracing: Q235B angle steel or steel rod
5) Roof Purlin: Q235B Galvanized Z section steel
6) Wall Girt: Q235B Galvanized C section steel
7) Sag rod: Q235B Galvanized steel rod
8) Roof Cladding: 0.5mm corrugated single color sheet with glass wool insulation
9) Wall Cladding: 0.5mm horizontal corrugated single color steel sheet
Wall and roof panel
The roof panel is usually a single continuous length from the eaves to the ridge line for portal frame buildings.
Wall panels are usually the continuous length from the bottom wall to the eaves of the building.
It is usually a corrugated single-color metal sheet with a thickness of 0.5mm-0.8mm. For a factory building that requires thermal insulation, you can choose to use a sandwich panel.
Steel materials have many advantages over other building materials (such as wood)
The prefabricated steel structure is manufactured according to strict specifications and tolerances.
All materials are 100% recyclable.
The steel structure is not easy to warp, bend, twist, or bend, and is easy to modify and flexible in design.
Steel structure can improve building quality and reduce maintenance while providing higher safety and resistance.
In terms of the construction period, the steel structure has obvious advantages. The prefabricated steel structure building construction is speedy because its construction is produced in the factory on the construction site. Only hoisting and splicing can meet some manufacturers’ needs for emergency construction and warehouse construction.
After the steel components are processed and transported to the construction site, the components only need to be hoisted and welded. There is no water operation, no sand, and a large amount of dust generated during the whole process, which can reduce environmental pollution and impact nearby residents. However, the traditional concrete Buildings can’t do this, which means that steel structures have done a good job in environmental protection, the most important aspect of humanity. Besides, the recyclability of steel also conforms to the concept of sustainable development. In contrast to concrete buildings, after demolishing, there is a pile of construction waste.
Steel structure saves construction costs and labor costs more than concrete. The cost of building made of steel structure is 20% to 30% lower than that of traditional concrete buildings, and steel structure is stronger and more durable than concrete and has the superior seismic performance.
The steel structure building itself has the characteristics of lightweight. The prefabricated steel structure warehouse walls and roof are made of light metal building materials, which are much lighter than the brick and concrete wall ceramic tile roof, which can reduce the warehouse’s overall weight and does not damage the stability of the structure.
Contact Person: Alice Lee